Tormek Sharpening |  Tormek Sharpening Jigs |  Tormek SVD-185 Universal Gouge Jig

Tormek SVD-185 Universal Gouge Jig

Tormek SVD-185 Universal Gouge Jig  (Ref: 910084)

50.21 60.25

(Ref: 910084) Quantity:

For sharpening various turning gouges and most carving gouges
Supplied with labels to record jig settings for each gouge


For sharpening bowl, spindle and fingernail turning gouges and most carving gouges up to 1" wide and, in its latest form, multi-tip scraper blades with mounting holes from 5mm to 8mm diameter. The benefits re-grinding a gouge to the fingernail form are two-fold: firstly, the risk of digging in is greatly reduced and, secondly, the increased length of edge of the fingernail shape makes the gouge far more versatile and controllable. The SVD-185 not only allows the grinding of an even, symmetrical shape but allows different lengths of side edges to be produced all with the same bevel angle. Each jig comes with a set of labels so that you can record the jig settings for each gouge for future reference.

The jig comprises a tool holder (1) which runs in a sleeve (2). The tool is aligned with a disc (4) and tightened with a knob screw (5). There is a washer (6) for wide gouges. The stop ring (7) can be set for a convex bevel with a screw (8).

The tool holder can be set in any position from 0 to 5 with the 5 mm allen key (9). The setting can be noted on a special recipe label (10), which is attached to the ferrule. A special pen, which works on these labels is included (11). For turning cutters there is a shaft (12) with a mounting screw (13) and a 2,5 mm allen key (14). PDF Gouge Jig SVD-185 Instruction.



Tormek Sharpening |  Tormek Sharpening Jigs |  Tormek SVD-185 Universal Gouge Jig





Tormek Sharpening Homepage
checkout
  View Basket
Tormek Sharpening UK Delivery
Free UK Delivery